NanoCove Ultra-Slim LED Lighting

120° x 120° beam angle, available as RGB or White
Linear, color-changing LED lighting fixture for architainment applications

 

NanoCove is a small yet surprisingly powerful fixture, offering an unprecedented level of control for such a petite design. At only a 0.5" wide and 0.281" tall, this colorful and controllable fixture is designed to provide stunning results in areas where space is a factor. Each foot-long fixture employs Performance Profiles which allow adaptation into a wide reange of control scenarios while offering smooth fades and flicker-free operation.


High-Resolution Lighting

NanoCove is our first product to feature ChromaBlendTM, a part of our proprietary driver technology. Rather than illuminating as a single color, each fixture blends to the color of its neighbor across the length of the fixture to create a more smooth color gradient with an effective resolution of 2.5 inches. This high-resolution blend effect is created automatically, without increasing control system requirements.

 

ChromaBlend automatically blends the colors to the next fixture.

 

DMX Controllable

NanoCove is controlled via DMX512-A using either 8 or 16 bit (24 or 48 bits per fixture) control over each color, mixing red, green and blue light to provide a possible array of up to 281.5 trillion assignable color combinations prior to the internal smoothing process. Each unit employs RDM support for easy addressing and configuration.

 

High Dynamic Range

Excellent low-end dimming and brightness control is achieved with NanoCove's unique driver design, perfect for use in low-light conditions. Additionally, PWM strobing is eliminated with our enhanced-spectrum modulation, providing a visually-steady illumination. This is important for use in areas where viewers are visually following a moving point of interest, or are themselves moving, such as when enjoying an amusement ride or simply walking into a room.

 

Performance Profiles
NanoCove can be configured for a wide range of control scenarios by combining built-in features. With 36 unique profiles to choose from, features such as Low-End Curve Correction, ChromaBlend, Bit Depth and Internal Fade Slewing make NanoCove a powerfully adaptable lighting device. More info here.

 

Small Footprint

Each fixture is only 0.5 inch wide and 0.281 inch tall, allowing NanoCove to be mounted in areas of limited space.

 

Efficient Design

There is a lot of capability packed into this small fixture, which only consumes 3.6 watts of power at maximum illumination. The manufacturing process is streamlined to produce minimal waste, most of which is recyclable.

 

Made in the USA

All of our LED fixtures are designed and manufactured in the USA using high-quality CREE leds, RoHS compliant components and a lead-free process.

 

NanoCoveTM Ultra-Slim LED Lighting Specifications*
Item Specification NCRBG-120P NCW-120P
Output Lumens1 ~140 lm ~440 lm
Primary Cone 120° x 120°
Color Mix Distance ~0" (internal to fixture)
Color Range 281.5 trillion colors 65.5k (grayscale shades)
Electrical Power Source Use only with Class 2 power unit
Input Voltage 12 VDC
Fixture Current 0.3A max at full output 0.6A max at full output
Chained Units Up to 14/power supply Up to 8/power supply
Safety
Environment Dry locations, Indoor use only
Fixture Certifications ETL / Intertek Listed
Conforms to ANSI/UL Std. 2108
Certified to CAN/CSA Std. C22.2#250.0
Physical Dimensions2 (L x W x H) 12" x 0.5" x 0.281" (305 x 13 x 7 mm)
Weight2 1.6oz (45g) per foot max.
Housing Material Anodizied Aluminum Extrusion
Lens Clear Cast Acrylic
Mounting Various specialty brackets available
Control Signal Protocol DMX512-A, E1.20 RDM enabled
Bit Depth 8 or 16 bits per color (24 or 48 bits per fixture)
Addressing Set via RDM
Chained Control Up to 170 units per DMX512 Universe
Modulation Type Enhanced-spectrum Modulation, ChromaBlendTM and 36 Performance Profiles
Patent Licensing ChromaCove operates under a direct license agreement with Philips to utilize certain patented technologies. Proof of this agreement is available upon request.
Origin This product is designed and manufactured in the United States of America
*Specifications are subject to change without notice. Model revisions and the latest innovations may not be listed here.
1 Total lumens of light availabe from the unbalanced output of the LEDs within the light engine.
2 Dimensions and weight do not include mounting brackets or other hardware.